install your cutting bits onto the spindle use spanner to fix it tight use clamps to fix your work piece onto the platform use x+ button to move spindle to the right direction and x- to move spindle to the left direction use y+ to move spindle go further from you. and y- to move spindle go towards you use z+ to move spindle upward and z- to move downward
change high/low speed mode by pressing this button. it moves more slowly when low mode is activated. press home button and spindle will go home position. it's the mechanical 0 point of the machine. press mode button to switch among [continuous] [step] and [distance] move spindle to the start point you want and press [xy->0] button to set origin point. press [on/off] and [menu] button together to start tool sensor mode the spindle goes down on and on slowly until it touches the tool sensor in this way the machine get to know the thickness of your work piece